Notched Square - LCE200

1 Piece cutter with imprint detail.
Size: 35mm

***Please note that the thickness of the clay is quite important on a cutter with as much of a stamp footprint as this. You will usually need to roll your clay a bit thinner than with our other detailed cutters. We recommend starting at 2mm thickness and either reducing or increasing the thickness from there until you achieve the desired result. The end result ends up thicker because the displaced clay builds up on that sides of the cutter***

Our Polymer Clay Cutters are 3D printed with PLA and have a 0.4mm cutting edge for a sharp and clean cut. They have a 3mm profile for easy gripping and a sturdy cutter.

TO USE:
Working on a glass sheet or tile is recommended to keep the clay from sticking to your cutter.  Corn starch is a great way to help from clay sticking to your cutter, especially a cutter with small details.   Gently press into clay, slightly wiggle the cutter, and lift to remove. Edges can be smoothed with your fingertips or sanded after baking. 

CUTTER CARE:
Please be gentle when using your cutters. They are made from PLA filament which is durable but can be damaged if mistreated.
Wash with warm water & soap as desired. These are NOT dishwasher safe.

Please Note: The colours may differ from those in the photos

If you have any questions about sizing or how to use your cutter please contact me!